Hybrid Nasal Pillows Full Face CPAP Mask FitPack with Headgear
RELATED ITEMS YOU MIGHT CONSIDER
CUSTOMER PRODUCT REVIEWS: Write a Review and Share Your Thoughts With Others!
Not for me
Written By: Crabby68 , Ohio 10/2/2017
Good idea but not for me. Hard to get/keep pillows in the nose.
Written By: JoeH, California 9/4/2017
I ordered the hybrid mask because I need a full face mask, and the typical large masks irritate my skin. Through the night, I wake up with itchy skin under the mask surface. Be patient when you get this mask. Take time to experiment and choose the right size. Then test the location of the mouthpiece when the nose pillows are in place; adjust the pillows if necessary. I had to tighten the mask a bit more than I expected, though it is still quite comfortable. Now that I have it sized and the adjustment refined and set, I am sleeping comfortably with no leaks throughout the night. I sleep mostly on one side or the other. Even sleeping on my sides does not push this mask to leak. Love it.
Written By: DMU, Florida 8/23/2017
this does not seal well against your face, and is undersized. I have the large, and it is way too small. because it does not seal well, the noise and air pressure wakes you up all night...
Great Idea Poor Quality
Written By: Becky, Bristol VA 7/27/2017
The concept is awesome, however, the nasal pillows are almost impossible to create a seal. I have some ResMed pillows that seat beautifully, these pillows do not.
Written By: Don G, mo. 6/13/2017
mmm. poor design, your rating on this mask is a joke,do not buy cant use,can't stop leaks.been using capo since 1999
Get the right fit and this mask is AWESOME!
Written By: Tony B, New Paris, Ohio 10/19/2016
I WAS using the Resmed Airfit P10 nasal pillows and love them but I unfortunately am a mouth breather and have been using the Puresome Ruby Chin Strap which is by far the best chin strap available but I'm not a fan of multiple pieces to keep my mouth shut and I didn't want a full face mask, just takes up too much real estate on my face so when I heard about the hybrid masks I jumped at the chance to try them. I ordered the Resmed Mirage Liberty Hybrid Mask and gave it a try for a week with my Resmed Air Sense 10 Auto Set. My Ramp is set at 8 CM/H2O initial pressure then ramps to my prescribed pressure of 15 CM/H2O. I tried the Medium/Regular size as I used the medium P10 size. It fit nicely but when the pressure hit 15 CM/H2O The nasal pillows on the Mirage are constructed differently and even though sealed well at low pressure the pillows leak and pop out from my nose. Unless I tightened the head gear so tight it was very uncomfortable, they would leak. So I returned the Mirage Liberty and came across the Sleepweaver full face cloth mask in medium and then small with no success and as 80% of the customer reviews agree with leak issues. Finally I researched the Resp Care Hybrid Mask and the reviews were very promising and since it comes with every possible sizing options I gave it a try. Although the sizing options are so vast I was lucky that the medium nasal pillows and mouth cushion worked for me. Although some people have reviewed that there ar leaks, you have to use trial and error to get teh perfect fit and once you have it, you have to tweak the headgear just right. Once you have a good fit and the headgear just right for you, it doesn't have to be very tight at all and it seals well. I toyed around with different pressure all the way up to 30 CM/H2O and it still held the seal. I did find that strap adjustments are more fitted in the sleeping position. So I set the straps sitting up then laid down and adjusted them again and did the mask fitting mode on my machine. The chin rest is a must for me, the Mirage, as many others complain, gave my mouth a wind tunnel and at 10 CM/H2O and higher blows your cheeks open since the air tube shoot right into your mouth. I've been using it for the past 2 weeks and get a airtight seal and a great night's sleep. Although some reviews complain about the heardgear quality I found the addition of the velcro adjustment on the top of the headgear made getting a good nasal pillow seal even easier to dial in. Ok now the things I love and the things Resp Care should improve on in future versions. PROS The vast sizing options included VERY light, much lighter than the Mirage Liberty Chin Strap in vital to this mask's success for mouth breathers that don't want the dreaded wind tunnel mouth The added velcro on the top of the head gear for added adjustments The nasal pillows have 3 height adjustments CONS The exhalation ports blast straight forward, a mesh style port would be a real upgrade A quick release clip on the front of the mask would be a nice upgrade
Written By: Erica, Colorado 8/13/2016
No matter how I arranged all the pieces I never got it to seal.
Written By: Dennis, Louisiana 6/23/2016
The mask is much more comfortable to me than then nose/mouth mask I have used for the last 2 years. I sometimes have leakage problems around the temple area, but it is much better than partial mask. It leave less reddening of the skin where it seals against the face. The only negative, is that it tends to ride up the face at night, but overall I am very pleased with it.
HYBRID NASAL PILLOWS FULL FACE CPAP MASK
Written By: Vernon, east TN 5/14/2016
This is a good mask and has an excellent design and concept. The mask is not however good for higher pressure CPAP or BiPAP use.
Half baked at best
Written By: Steve , OH 11/27/2015
This mask does not work well with Resmed Autoset 10. The bypass valve leaks unless you have an initial pressure of 6-7. Also the diffusers are noisy and too large. (large leak values) The clips are too difficult to fasten and remove even for Houdini. Also the chin support may not fit your face and have to be trimmed off. Perhaps they can address these issues in the next model.
View Popular Sleep, Oxygen & Asthma Therapy Search Terms • Hybrid Masks for CPAP & BiLevel Therapy • Masks for CPAP & BiLevel Therapy • Nasal Pillow Masks for CPAP & BiLevel Therapy • Full Face Masks for CPAP & BiLevel Therapy • Multi-Fit FitPack Masks for CPAP & BiLevel Therapy • Sleep Therapy Products by InnoMed Technologies • Sleep Therapy