Salter High Flow Bubble Humidifier Bottle (Tan Lid) for Various Oxygen Concentrators
Salter Tan Lid High Flow Bubble Humidifiers feature 360° molded diffuser ports, at the bottom of the internal humidifier tube, to increase overall humidity and reduce noise during use. Large, permanently etched maximum/minimum water level markings on the transparent bottle; and an easy to grip quad wing nut connector add user friendly touches to this premium bottle design.
The 7900 Bubble Humidifier Bottle has a 6 PSI Audible Pop-off Pressure Alarm to warn of any obstructions to oxygen flow and help reduce the likelyhood of concentrator damage due to downstream occlusion.
CLEANING: Use sterile distilled water whenever possible to reduce the possibility of contamination and scaling. If using distilled water, remove the humidifier bottle every 7 days, wash with mild soap and water and rinse thoroughly. If using boiled tap water, remove the humidifier bottle every 3 days, wash with mild soap and water, rinse thoroughly, and allow to air dry. If the humidifier shows scaling, damage or wear and tear, replace immediately. For complete instructions review the documentation that came with your equipment.
- Manufacturer Salter Labs
- Part Number(s) 7900-0
- HCPCS Code E1399
- GTIN / UPC Code 00607411700057
- Country Mexico (Typical Origin)
- Most Continuous Flow Oxygen Concentrators.
- Size (Approx) 7 Inches Tall
- Inner Diameter 3.125 Inches
- Materials Not Made with Natural Rubber Latex
- Chamber Capacity 290 mL
- Oxygen Flow Rates 6-15 LPM Recommended
- Humidity Output > 10 MG H2O/L