Save big on every order. Skip or cancel at any time.
Clear Inlet Filter for Millennium M10 Oxygen Concentrators
SUBSCRIBE & SAVE & Save 10%%
Save big on every order. Skip or cancel at any time.SUBSCRIBE & SAVE & Save 10%%
The Clear Inlet Filter should always be used with a Pre-Inlet Filter to improve filtration levels. The Clear Inlet Filter is not designed to be cleaned. It should be replaced as necessary, on average once a year.
COMPATIBILITY: This clear inlet filter can be used to replace the existing inlet filter in a variety of oxygen concentrators including the following filter part numbers: H620 for Respironics Millennium concentrators; H620 for Covidien Nellcor Puritan Bennet 492, 492A, 590, 592A concentrators; 100-6631-00 for Healthdyne Alliance and BX5000 concentrators, H620 for Drive DeVilbbiss Pure concentrators, and RP-213 for Chad Total O2 concentrators.
NOTE: This filter was originally supplied with a blue silencer cap for added noise reduction; however that accessory has been discontinued and is no longer available from the manufacturer.